Many
people are now using Digital SLR cameras to take amazing
deep-sky astrographs. Using the camera's internal shutter
control typically limits the exposure time to 30 seconds.
To get longer exposure times, the bulb stop (B) of the
camera must be used. In bulb mode, the shutter is
controlled by a remote control. If you wish to use a
computer to generate the remote control commands, the
products on this page will allow you to do so when used
with appropriate software that supports this adapter.
Currently, the DSUSB is supported by Nebulosity software.
The DSUSB is a
USB peripheral for your computer that allows software to
control your camera's shutter. In addition to the DSUSB,
you will need a cable that is appropriate for your camera.
The USB cable on DSUSB is 3 feet long.
Kit
for Canon EOS 300D, 350D and 400D (Digital Rebel):
In this kit you'll find the DSUSB and a 4 meters long
connection cable.
We recommend that you purchase the DSUSB bundled with
Nebulosity if you don't already own one of these fine
software products (Note: Nebulosity doesen't support Canon
EOS 300D).
Kit for Canon 10D, 20D, 20Da, 30D, 40D and D60:
Canon
developed a proprietary connector for the remote control
on these cameras. It is called a Canon N3 connector. We
offer a cable that allows you to directly connect these
cameras to our DSUSB shutter controller.
We recommend that you purchase the DSUSB bundled with
Nebulosity if you don't already own one of these fine
software products.
Note for Nikon D70 and D50:
There is no
wired remote control inputs on these cameras. We are
working on an infrared version of the DSUSB. Check back
soon!
In the
manual you'll find all the explanations to start
using DSUSB immediately. |
|
DSUSB SHUTTER
CONTROL INTERFACE
with 4 meters
connection cable and english user manual |
 |
|
|
Price: |
Shipping cost: |
|
DSUSB Kit for Canon EOS 300D, 350D
and 400D
(Digital Rebel): |
€ 84,00 |
€ 25,00 |
Order Shutter Control Interface KIT
for Canon 350D /400D with Nebulosity
|
|
Price: |
Shipping cost: |
|
DSUSB Kit with Nebulosity 2 for Canon EOS 350D
and 400D
(Digital Rebel): |
€ 138,00 |
€ 25,00 |
|
 |
|
|
DSUSB SHUTTER
CONTROL INTERFACE
with 2 meters
connection cable and english user manual |
|
|
|
Price: |
Shipping cost: |
|
DSUSB Kit for Canon EOS 10D, 20D, 20Da,
30D, 40D and
D60: |
€ 115,00 |
€ 25,00 |
Order Shutter Control Interface KIT
for Canon 10D, 20D, 20Da, 30D, 40D and D60 with Nebulosity
|
|
Price: |
Shipping cost: |
|
DSUSB Kit for Canon EOS 10D, 20D, 20Da,
30D, 40D and
D60 with Nebulosity: |
€ 169,00 |
€ 25,00 |
DSUSBCheck by Shoestring Astronomy
Click here to install the free
software you can use to verify your DSUSB
DSUSBCheck is a
simple, free software application that you can use to verify
that your DSUSB, computer, and camera are all together working
properly. You
should use this the first time you set up your system. You can
also use it as a debugging tool anytime your system is not
functioning properly. If your system works fine with DSUSBCheck,
but not with your third-party software, then the problem most
likely lies with the third-party software and you should contact
them for technical support. If your system does not work with
DSUSBCheck, then you should contact us for technical support. |
|
